2003-2009 (W211) No gearbox dash display

Discussion in 'E-Class' started by Sandhu, Apr 1, 2017.

  1. Sandhu

    Sandhu New Member

    No gearbox dashboard display p or d
    Not starting no crank stuck in p
    Eps abs etc coming on when Trying to start
    W211 722.9 7 speed auto
    Help
     
    Last edited: Apr 1, 2017
  2. engineer

    engineer Member

    You need to read the fault codes but my guess is that shifter module is defective. Yes, that can stop your car from starting.
     
  3. Sandhu

    Sandhu New Member

    Fault can not communicate with tcm u0101
    Changed shifter.gear stick . brake switch .battery .
    Seems when voltage is reading 14.2 + it shows gearbox display no abs etc fault and will start .when switched off will show same fault and not start. When started drive s fine
     
    Last edited: Apr 2, 2017
  4. Sandhu

    Sandhu New Member

    hi thanks for quick reply
    Fault can not communicate with tcm u0101
    P0031- P0135- P0130- P0132 -P0100 -P1102- P0102- P1111 -P0111 -P2A00
    Changed shifter.gear stick . brake switch .battery .
    Seems when voltage is reading 14.2 + it shows gearbox display no abs etc fault and will start .when switched off will show same fault and not start. When started drive s fine
     

Share This Page